Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 511)

Spanning Tree Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 19.21
show spanning-tree mst detail interface
This command prints detailed information about the specified switch port, and the MST
instances associated with it.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show spanning-tree mst detail interface <port>
Mode User Exec, Privileged Exec and Interface Configuration
Example To display detailed information about port1.0.3 and the instances associated with it,
enter the command:
Parameter Description
<port> The port to display information about. The port may be a switch port
(e.g. port1.0.4), a static channel group (e.g. sa2), or a dynamic
(LACP) channel group (e.g. po2).
awplus# show spanning-tree mst detail interface port1.0.3