Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1942)

LLDP Commands
Software Reference for x310 Series Switches
71.16 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
lldp run
This command enables the operation of LLDP on the device.
The no variant of this command disables the operation of LLDP on the device. The LLDP
configuration remains unchanged.
Syntax lldp run
no lldp run
Default LLDP is disabled by default.
Mode Global Configuration
Examples To enable LLDP operation, use the commands:
To disable LLDP operation, use the commands:
Related Commands show lldp
awplus# configure terminal
awplus(config)# lldp run
awplus# configure terminal
awplus(config)# no lldp run