Auth-web-server session-keep, Auth, Web-server session-keep – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1183
Authentication Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
43.57
auth-web-server session-keep
This command enables the session-keep feature to jump to the original URL after being
authorized by web authentication.
Use the no variant of this command to disable the session keep feature.
Syntax
auth-web-server session-keep
no auth-web-server session-keep
Default
The session-keep feature is disabled by default.
Mode
Global Configuration
Examples
To enable the session-keep feature, use the following commands:
To disable the session-keep feature, use the following commands:
Validation
Commands
show auth-web-server
show running-config
awplus#
configure terminal
awplus(config)#
auth-web-server session-keep
awplus#
configure terminal
awplus(config)#
no auth-web-server session-keep