Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2165)

Stacking Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 83.25
To set the resiliency link to be VLAN 4093.
First use the stack resiliencylink command to create the resiliency vlan 4093
Next use the switchport resiliencylink command to assign the resiliencylink vlan to the
interface port, in this case port1.0.1.
Related Commands show stack
show stack resiliencylink
stack disabled-master-monitoring
switchport resiliencylink
awplus# configure terminal
awplus(config)# stack resiliencylink vlan4093
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# switchport resiliencylink