Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 609)

Power over Ethernet Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 23.11
Examples To set the priority level to high for port1.0.2, use the following commands:
To reset the priority level to the default for port1.0.2, use the following commands:
Validation
Commands
show power-inline
show power-inline interface
show running-config power-inline
Related Commands power-inline usage-threshold
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# power-inline priority high
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no power-inline priority