Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1819)

SNMP MIBs
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 69.7
atAlmMonActionUseRelay3
{ atAlmMonActionEntry 8 }
Indicates/controls whether or not this alarm monitor
drives the third relay output. Values can be:
■ Unused (1)
■
Used (2)
atAlmMonActionUseFaultLed
{ alAlmMonActionEntry 9 }
Indicates/controls whether or not this alarm monitor
drives the fault LED. Values can be:
■ Unused (1)
■ Used (2)
alAlmMonAbnormalState
{ atAlmMonActionEntry 10 }
Indicates/sets the abnormal (i.e., alarm active) state for a
contact input. Only used for contactInput alarm monitors,
ignored for all other types. Values can be:
■
open (1)
■
closed (2)
atAlmMonActionState
{ atAlmMonActionEntry 11 }
Indicates the current state of this alarm monitor. Values can
be:
■ Inactive (1)
■
Active (2)
Object / Object Identifier Description