Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1042)

QoS Commands
Software Reference for x310 Series Switches
39.36 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show class-map
Use this command to display the QoS class-maps to define the match criteria to classify
traffic.
Syntax show class-map <class-map name>
Mode User Exec and Privileged Exec
Example To display the QoS class-maps to define the match criteria to classify traffic, use the
command:
Output Figure 39-2: Example output from the show class-map command
Related Commands class-map
Parameter Description
<class-map name> Name of the class-map.
awplus# show class-map cmap1
CLASS-MAP-NAME: cmap1
Set IP DSCP: 56
Match IP DSCP: 7