Ip igmp – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 744
IGMP Snooping Commands
Software Reference for x310 Series Switches
31.6
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
ip igmp
Use this command to enable IGMP on an interface. The command configures the device as
an IGMP querier.
Use the no variant of this command to return all IGMP related configuration to the default
on this interface.
Syntax
ip igmp
no ip igmp
Default
Disabled
Mode
Interface Configuration for a VLAN interface.
Usage
This command can only be configured on VLAN interfaces, and will have no effect on
IGMP Snooping configuration.
Ensure your VLAN is configured first: see
Example
Validation
Commands
show ip igmp interface
show running-config
Note
An IP address must be assigned to the VLAN first, before this command will
work.