Service advanced-vty – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 109
User Access Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
5.23
service advanced-vty
This command enables the advanced-vty help feature. This allows you to use TAB
completion for commands. Where multiple options are possible, the help feature displays
the possible options.
The no service advanced-vty command disables the advanced-vty help feature.
Syntax
service advanced-vty
no service advanced-vty
Default
The advanced-vty help feature is enabled by default.
Mode
Global Configuration
Examples
To disable the advanced-vty help feature, use the command:
To re-enable the advanced-vty help feature after it has been disabled, use the following
commands:
awplus#
configure terminal
awplus(config)#
no service advanced-vty
awplus#
configure terminal
awplus(config)#
service advanced-vty