Ip dhcp bootp ignore – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1706
Dynamic Host Configuration Protocol (DHCP) Commands
Software Reference for x310 Series Switches
64.8
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
ip dhcp bootp ignore
This command configures the DHCP server to ignore any BOOTP requests it receives. The
DHCP server accepts BOOTP requests by default.
The no variant of this command configures the DHCP server to accept BOOTP requests.
This is the default setting.
Syntax
ip dhcp bootp ignore
no ip dhcp bootp ignore
Mode
Global Configuration
Examples
To configure the DHCP server to ignore BOOTP requests, use the commands:
To configure the DHCP server to respond to BOOTP requests, use the commands:
Related Commands
awplus#
configure terminal
awplus(config)#
ip dhcp bootp ignore
awplus#
configure terminal
awplus(config)#
no ip dhcp bootp ignore