Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2060)

Ping-Polling Commands
Software Reference for x310 Series Switches
79.2 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Command List
This chapter provides an alphabetical reference for commands used to configure Ping
Polling. For more information, see
Chapter 78, Ping Polling Introduction and
Configuration .
For information about modifying or redirecting the output from show commands to a file,
see
“Controlling “show” Command Output” on page 1.37 .
Table 79-1: The following table lists the default values when configuring a ping poll.
Default Value
Critical-
interval 1 second
Description No description
Fail-count 5
Length 32 bytes
Normal-
interval 30 seconds
Sample-size 5
Source-ip The IP address of the interface from which the ping packets are
transmitted
Time-out 1 second
Up-count 30