Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 665)

IP Addressing and Protocol Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 25.31
traceroute
Use this command to trace the route to the specified IPv4 host.
Syntax traceroute {<ip-addr>|<hostname>}
Mode User Exec and Privileged Exec
Example
undebug ip packet interface
This command applies the functionality of the no debug ip packet interface command
on page 25.11 .
Parameter Description
<ip-addr>
The destination IPv4 address. The IPv4 address uses the
format A.B.C.D.
<hostname>
The destination hostname.
awplus# traceroute 10.10.0.5