Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 393)

Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 15.31
show mac address-table
Use this command to display the mac address-table for all configured VLANs.
Syntax show mac address-table
Mode User Exec and Privileged Exec
Usage The show mac address-table command is only applicable to view a mac address-table for
Layer 2 switched traffic within VLANs.
Example To display the mac address-table, use the following command:
Output See the below sample output captured when there was no traffic being switched:
awplus# show mac address-table
awplus#show mac address-table
VLAN Port MAC State
1 unknown 0000.cd28.0752 static
ARP - 0000.cd00.0000 static