Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1779
SNMP Introduction
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
67.21
7.
Set the IP address of the
TFTP server.
atFilev2TftpIPAddr
{ atFilev2Tftp_4 1 }
<ip-addr>
8.
Check that no other
transfer is in progress, and
that the required
parameters have been set.
atFilev2CopyBegin
{ atFilev2Operation 7 }
Read: idle
9.
Start the file transfer.
atFilev2CopyBegin
{ atFilev2Operation 7 }
Set: 1
10.
Monitor file transfer
progress.
atFilev2CopyBegin
{ atFilev2Operation 7 }
Read:
In progress:
copying <src> -->
<dst>
or
Success:
copy <src> --> <dst>
success
or
Failure:
copy <src> --> <dst>
failure: <err-msg>
Table 67-5: Procedure for copying a file to or from a device using a TFTP server
Do this ...
By setting or reading this
MIB object ...
Whose object ID is ...
To this value ...