Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 437)

VLAN Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 17.9
show vlan classifier group interface
Use this command to display information about a single switch port interface for all
configured VLAN classifier groups.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show vlan classifier group interface <switch-port>
Mode User Exec and Privileged Exec
Usage All configured VLAN classifier groups are shown for a single interface.
Example To display VLAN classifier group information for switch port interface port1.0.2, enter
the command:
Output Figure 17-3: Example output from the show vlan classifier group interface port1.0.1
command:
Related Commands vlan classifier group
show vlan classifier interface group
Parameter Description
<switch-port> Specify the switch port interface classifier group identifier
awplus# show vlan classifier group interface port1.0.2
vlan classifier group 1 interface port1.0.1