Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1049)

QoS Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 39.43
show policy-map
Displays the policy-maps configured on the switch. The output also shows whether or not
they are connected to a port (attached / detached) and shows their associated class-maps.
Syntax show policy-map [<name>]
Mode User Exec and Privileged Exec
Example To display a listing of the policy-maps configured on the switch, use the command:
Output Figure 39-9: Example output from the show policy-map command
Related Commands service-policy input
Parameter Description
<name> The name of a specific policy-map.
awplus# show policy-map
POLICY-MAP-NAME: general-traffic
State: attached
Default class-map action: permit
CLASS-MAP-NAME: default
CLASS-MAP-NAME: database-traffic