JLG 1500SJ Service Manual - Manual (Page 102)

SECTION 3 - CHASSIS & TURNTABLE
3-54 – JLG Lift – 3121262
6. Loosen the M10x25 flathead socket screws and
remove the planetary ring without damaging the O-
Ring.
7. Remove the release joint together with the spring.
8. Disassemble the Ø40 outer snap rings and using an
extractor remove the planetary gears from the spin-
dle pins.
9. Loosen the M6x6 socket headless screws and also
remove the 3/16" balls.
10. Loosen the ring nut using the special wrench.
11. Remove the hub support together with the roller
bearing inner track.