JLG 1500SJ Service Manual - Manual (Page 300)

SECTION 4 - BOOM & PLATFORM
4-54 – JLG Lift – 3121262
Installation
1. Attach an adequate lifting device to the jib and posi-
tion it in front of the boom.
2. Place something under the front of the jib that will
allow it to slide or move along the ground easily.
Attach a lifting device to the rear of the jib, allowing
the front to pivot on the ground.
3. Lift the jib into position on the boom fly section and
install the jib pivot pin. Secure the pin in place with
the keeper pin and bolt.