JLG 1500SJ Service Manual User Manual
Page 157
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3121262
– JLG Lift –
3-109
31. Tag and disconnect the hoses from the top of the
swivel. Cap or plug all openings. Use a tie strap to
secure the hoses together.
32. Tie off the bundle of hydraulic hoses to the center
support to prevent any damage to the hoses during
the remainder of the procedure.
33. Remove the hardware securing the swing brake to
the swing drive and lay the swing brake and motor
to the side.
NOTE: The complete swing drive assembly weighs approxi-
mately 290 lbs. (132 kg).
34. Remove the hardware securing the swing drive to
the turntable and remove the swing drive.
NOTE: Remove the shoulder/pivot bolt last.
Advertising