JLG 1500SJ Service Manual - Manual (Page 21)

SECTION 1 - SPECIFICATIONS
3121262 – JLG Lift – 1-1
SECTION 1. SPECIFICATIONS
1.1 OPERATING SPECIFICATIONS 1.2 DIMENSIONAL DATA
Table 1-1. Operating Specifications
Capacity - ANSI
Unrestricted
Restricted
500 lbs (227 kg)
1000 lbs (454 kg)
Capacity - CE & Australia
Unrestricted
Restricted
500 lbs (230 kg)
1000 lbs (450 kg)
Maximum Travel Grade, stowed
Position (Gradeability) 40%
Maximum Travel Grade, stowed
Position (Side Slope) 5%
Maximum Drive Speed 3.0 mph (4.8 kph)
Gross Machine Weight - Approximate 48000 lbs. (21772 kg)
Ground Bearing Pressure - Maximum
113 psi (7.94 kgcm 2 )
Maximum Wind Speed 28 mph (12.5 m/s)
Maximum Manual Force 400 N
Maximum System Voltage 12 volts
Maximum Main Relief Hyd. Pressure 4600 psi (317 Bar)
Table 1-2. Dimensional Data
Turning Radius (Axles Retracted)
Outside
Inside
22 ft. 6 in. (6.8 m)
14 ft. 5 in. (4.4 m)
Turning Radius (Axles Extended)
Inside
Outside
8 ft. (2.4 m)
19 ft. 4 in. (5.9 m)
Machine Height (stowed) 9 ft. 11 in. (3.04 m)
Machine Length (stowed) 61 ft. 8-5/8 in. (18.81 m)
Platform Height
Unrestricted Capacity
Restricted Capacity
150 ft. 1 in. (45.75 m)
130 ft. 2 in. (39.67 m)
Horizontal Reach from centerline of
rotation
Unrestricted Capacity
Restricted Capacity
80 ft. (24.38 m)
64 ft. 11 in. (19.79 m)
Horizontal Reach over end
Unrestricted Capacity
Restricted Capacity
72 ft. 4 in. (24.38 m)
57 ft. 3 in. (17.45 m)
Horizontal Reach over side
Unrestricted Capacity
Restricted Capacity
73 ft. 9 in. (22.48 m)
58 ft. 9 in. (17.91 m)
Overall Width
Axles Retracted
Axles Extended
8ft. 2in. (2.49 m)
12ft. 6in. (3.8 m)
Wheelbase 12ft. 6in. (3.81 m)
Tailswing 5ft. 5-7/8 in. (1.6 m)
Ground Clearance (Axle) 12 in. (30.4 cm)
Ground Clearance (Chassis) 25.5 in. (64.7 cm)