Turntable/swing bearing installation, Turntable/swing bearing installation -111 – JLG 1500SJ Service Manual User Manual
Page 159
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3121262
– JLG Lift –
3-111
40. Install lifting eyes into the swing bearing for removal.
NOTE: The swing bearing weighs approximately 300 lbs.
(136 kg).
41. Attach an adequate lifting device to the swing bear-
ing and remove it from the frame.
Turntable/Swing Bearing Installation
1. Remove the attaching hardware securing the swivel
and lay it off to the side.
2. Thoroughly clean the bearing mounting surface and
mounting holes.
Advertising