JLG 1500SJ Service Manual - Manual (Page 154)

SECTION 3 - CHASSIS & TURNTABLE
3-106 – JLG Lift – 3121262
13. Have a container or absorption material ready to
catch residual hydraulic fluid. Disconnect the tele-
scope hoses from the bottom of the hydraulic con-
trol valve. Cap or plug all openings. Pull the hoses
out so the can be lifted away from the machine with
the boom.
14. Have a container or absorption material ready to
catch residual hydraulic fluid. Disconnect the pres-
sure hose from the end of the main control valve.
Cap or plug all openings.
15. Remove the cover from the rear of the boom and
disconnect the wiring harnesses and hoses running
from the turntable to the boom.
16. Disassemble the end of the turntable-to-boom pow-
ertrack from the turntable. Use a lifting device to pull
the powertrack up so the hydraulic hoses and wiring
harnesses can be pulled out from the turntable.