JLG 1500SJ Service Manual - Manual (Page 158)

SECTION 3 - CHASSIS & TURNTABLE
3-110 – JLG Lift – 3121262
NOTE: The turntable assembly weighs approximately
20,650 lbs. (9370 kg).
35. Using the lifting lugs and the center support, attach
a lifting device to the front and rear of the turntable
to support its weight.
36. Remove the swing bearing inner race bolts. Remove
the bolts on the inside of the turntable first, leaving
3-4 bolts on both sides of the outside of the turntable
to be removed last.
NOTE: The turntable assembly weighs approximately
20,650 lbs. (9370 kg).
37. Lift the turntable assembly off of the swing bearing
and place it on adequate supports.
38. Remove the remote grease lines from the bearing.
39. Remove the outer race bearing bolts from the under-
side of the frame.