JLG 1500SJ Service Manual User Manual
Page 536
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-84
– JLG Lift –
3121262
18. Operate jib lift down until the jib stops. When the jib
is at the mechanical stop the operator must hit
ENTER again. The screen will show:
19. When the system completes this step, the next
screen will show:
20. Press ENTER. The screen should read:
21. Operate jib lift up until the jib stops. When the jib is
at the mechanical stop, Hit ENTER again. The
screen will show:
Advertising