JLG 1500SJ Service Manual User Manual
Page 557
Advertising
SECTION 6 - JLG CONTROL SYSTEM
3121262
– JLG Lift –
6-105
37. Operate the Jib Telescope In function switch until
the jib is telescoped in to the mechanical stop. Press
ENTER. The display will read:
38. Operate the Boom Telescope In function switch. The
control system will stop the boom at the desired
length. The display will read:
39. When the calibration step is done, the display will
read:
40. Press ENTER. The display will read:
Advertising