JLG 1500SJ Service Manual - Manual (Page 540)

SECTION 6 - JLG CONTROL SYSTEM
6-88 – JLG Lift – 3121262
NOTE: At this point the left or right arrow key may be used to
skip to any of the other jib sensor calibrations.
35. Hitting the ENTER key at this point will continue the
calibration sequence. The screen will show:
36. Press Enter. The screen shown below will be dis-
played. At this point, use the platform level up func-
tion switch to level up.
37. When the platform level up is at mechanical stop,
Press ENTER. The screen will show:
38. When the system is complete with this step, the
screen below will be displayed.