Boom sensor calibration position 8 -101 – JLG 1500SJ Service Manual User Manual
Page 553
Advertising
SECTION 6 - JLG CONTROL SYSTEM
3121262
– JLG Lift –
6-101
When Position 7 Calibrating is complete, the screen
will read:
Press Enter. The screen will read:
30. Lift until the function stops (controller will stop at 5
degrees above horizontal) for Calibration Position 8.
When the machine is in the proper position, hit
Enter. The screen will read:
Figure 6-28. Boom Sensor Calibration Position 8
Advertising