JLG 1500SJ Service Manual - Manual (Page 156)

SECTION 3 - CHASSIS & TURNTABLE
3-108 – JLG Lift – 3121262
24. Disconnect the negative battery terminal from the
battery.
25. Place a container under the machine to catch
escaping hydraulic fluid.
NOTE: The hood assembly weighs approximately 72 lbs.
(33 kg).
26. Attach an adequate lifting device to the rear hood
assembly.
27. Remove the attaching hardware securing the side of
the hood.
28. Remove the attaching hardware securing the top of
the hood.
29. Remove the front hood from the machine.
30. Repeat steps 4, 5, and 6 for the front hood on the
other side of the machine.