Changing engine oil, Changing the oil filter, Engine oil viscosity -125 – JLG 1500SJ Service Manual User Manual
Page 173
SECTION 3 - CHASSIS & TURNTABLE
3121262
– JLG Lift –
3-125
Changing Engine Oil
1. Allow the engine to warm up. The engine oil should
reach approximately 176° F (80° C).
2. Make sure the machine and engine are level.
3. Switch off the engine.
4. Place an oil tray under the engine.
5. Open the oil drain valve.
WHEN DRAINING HOT ENGINE OIL THERE IS A RISK OF SCALD-
ING.
DO NOT LET USED OIL RUN INTO THE SOIL; COLLECT THE USED
OIL IN A CONTAINER SUITABLE FOR DISPOSAL OR RECYCLING.
DISPOSE OF THE USED ENGINE OIL IN ACCORDANCE WITH ENVI-
RONMENTAL REGULATIONS.
6. Drain the oil.
7. Close the oil drain valve.
8. Pour in new engine oil. Refer to Section 1 for capac-
ity and refer to Figure 3-62., Engine Oil Viscosity for
the proper grade.
Changing the Oil Filter
1. Wipe the area around the filter to clean any dirt from
the area.
Figure 3-62. Engine Oil Viscosity