JLG 1500SJ Service Manual User Manual
Page 83
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3121262
– JLG Lift –
3-35
19. Assemble the 1st reduction assembly (16).
20. Insert the 1st stage sun gear (10).
21. Assemble the O-ring seal (9) into its seat in the end
cover (7).
22. Place the end cover (7) on the gearbox housing
(23).
23. Tighten the 10 socket head screws M10x25
(1),grade 12,9, by a torque wrench at 62.7 ft.lbs.
torque (85 Nm).
24. Insert the plugs (6) into the oil draining-filling holes
of the end cover (7). Torque the plugs to 52 ± 7
ft.lbs. (70±10 Nm).
Advertising