JLG 1500SJ Service Manual - Manual (Page 82)

SECTION 3 - CHASSIS & TURNTABLE
3-34 – JLG Lift – 3121262
13. Assemble correctly the spacers (21) on the pins of
the flanged hub (31).
14. Place the 5 planet assemblies of the 3rd reduction
(20) in the flanged hub's pin (31).
15. By using a rubber hammer and a metal stopper
push the planet assemblies of the 3rd reduction (20)
against the shoulder until assembly is complete.
16. By using pliers, assemble the circlips (19) in the
flanged hub pin seats (31).
17. Assemble the 2nd reduction assembly (18).
18. Insert the 2nd stage sun gear (17).