JLG 1500SJ Service Manual - Manual (Page 74)

SECTION 3 - CHASSIS & TURNTABLE
3-26 – JLG Lift – 3121262
13. Remove the disengagement shaft kit (15).
14. Place the disengagement shaft kit (15) inside the
special tool (6689960240).
15. Tighten the 2 screws M5x16, grade 8.8, of the cover
by a torque wrench to 18.4 ft.lbs. (25 Nm).
16. By using pliers remove the elastic ring (11) from the
splined shaft (14).
17. Remove the special tool and remove the spring (13)
and the washers (12).
18. Turn the gearbox upside down and unscrew the 2
screws M8x16 (4), grade 8.8, of the end cover (7).