JLG 1500SJ Service Manual User Manual
Page 53
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3121262
– JLG Lift –
3-5
Press ENTER
, the screen should read:
To enable the override mode 58237 must be entered as
the code. When the code is entered, the screen will show:
Use the Left
or Right
arrow key until you see:
Press ENTER
, the screen should read:
Swing and drive functions can now be used to swing the
turntable in the correct direction to return the boom
between the rear wheels in the event the boom is beyond
the swing envelope when the axles are retracted.
NOTE: For more detailed information concerning system
adjustment and operation, refer to Section 6 - JLG
Control System.
Advertising