Second section seals replacement, First section seals disassembly – JLG X20JP - X600AJ Service Manual User Manual
Page 203
Advertising
SECTION 5 - HYDRAULICS
3121623
– JLG Lift –
5-25
Second section seals replacement
Place on the body the new seals. Use clean grease to
keep the seal in place.
Fit the new seal (1) and back-up ring (2) on the plate.
First section seals disassembly
Remove the front cover.
Using a marker draw a reference mark on the plate and
the body. It will be used later during reassembly.
Remove the gears and the pressure plates.
1
2
Advertising
This manual is related to the following products: