JLG X20JP - X600AJ Service Manual - Manual (Page 248)

SECTION 6 - JLG CONTROL SYSTEM
6-32 – JLG Lift – 3121623
POSM3 B
ON Do not consider
OFF Do not consider
POSM4 A
ON Do not consider
OFF Do not consider
POSM4 B
ON Do not consider
OFF Do not consider
R.C. BASKET
ON The remote control is in the support in basket
OFF The remote control is not in the support in basket
INCLIN. X
0
Indicates the inclination of the machine on the X axis in tenth of degrees
(accelerometer A)
0 Indicates the inclination of the machine on the X axis in tenth of degrees (accel B)
INCLIN. Y
0
Indicates the inclination of the machine on the Y axis in tenth of degrees (accelerom-
eter A)
0 Indicates the inclination of the machine on the Y axis in tenth of degrees (accel B)
LOAD 94 Indicates the weight in Kg in the basket
POS. 1E2 0
Do not consider
POS. 3 2398
Indicates the opening of the 3 arm cylinder in tenths of a millimetre
ROTATION A 180 Do not consider
MOTOR RPM Diesel
Only
2200 Indicate the engine RPM
CURRENT A 2,5
Indicates (in tenth of mA) the current ECM1-2 is sending to the aerial part
proportional valve or to the left-side undercarriage proportional valve (values less
that 5 not relevant)
CURRENT B 45,3
Indicates (in tenth of mA) the current ECM1-2 is sending to the right-side
undercarriage proportional valve (values less that 5 not relevant)
CURRENT C 0 Do not consider
TEMPERAT. 37,6 Indicates the temperature of the control module in C°
SUPPLY (V) 12,1 Indicates the batteries voltage, or the output voltage from the battery charger
BATTERY % 100 Only for Lithium version: indicates the % level of charge of the pack
X17JP - X20JP - X500AJ - X600AJ