JLG X20JP - X600AJ Service Manual - Manual (Page 302)

SECTION 6 - JLG CONTROL SYSTEM
6-86 – JLG Lift – 3121623
Connect the Rahmino software to the machine, and
choose the right platform on the bar.
Choose the page “Lithium Battery System”.
Check the values in the windows indicated hereby.
Figure 6-72.
At the end of the charge (cells balancing operation), you
should have the follow values:
Delta (mV): it is the difference from the highest cell and the
lowest cell (Volt).
It should be around 50 (mV) or less
Lowest: It is the lowest cell (Volt). It should be more than
3550 mV. Normally this data concerns only one cell, its
number is indicated in the window “at”
Figure 6-70.
Figure 6-71.