JLG X20JP - X600AJ Service Manual - Manual (Page 308)

SECTION 6 - JLG CONTROL SYSTEM
6-92 – JLG Lift – 3121623
D - It is not possible to charge the battery package =
red/green light on the battery charger led is present
during the charge.
Figure 6-86.
E – It is not possible to charge the battery package at
100%, even after many hours of charge
If connecting the network cable 110-220V after two min-
utes the light on the battery charger light is red, go to step
6, otherwise go to step 20.
20 - Battery charger works correctly, but the battery level
never reach 100%.
Connect the network cable 120-220V and keep it con-
nected to the machine until the light on the battery char-
ger will flash yellow, then leave the it connected for at least
2 additional hours.
Figure 6-87.
If the failure remains, go to step 21.
21 – Battery charger lamp flashes yellow since many hour,
but the battery pack level never reached 100% of charge.
Connect the Rahmino software to the machine, and
choose the right platform on the bar (refer to Rahmino
Handout Service Manual).
Choose the page “Lithium Battery System”.
Figure 6-88.
Figure 6-89.