Cover seals replacement – JLG X20JP - X600AJ Service Manual User Manual
Page 206
Advertising
SECTION 5 - HYDRAULICS
5-28
– JLG Lift –
3121623
Cover seals replacement
Section
Put the cover on the working bench.
Remove the snap ring (1).
Paying attention not to damage the seat remove with a
screw driver (flat head) the shaft seals.(2 - 3)
Put some clean grease into the seat seal.
INSERT THE SHAFT SEAL. PAY ATTENTION TO THE ASSEMBLING
DIRECTION OF THE SHAFT SEAL (SEE SECTION). USING A MAL-
LET PUSH ALL THE WAY DOWN THE CASAPPA TOOL PN.
06100091.
1
2
3
Advertising
This manual is related to the following products: