JLG X20JP - X600AJ Service Manual - Manual (Page 95)

SECTION 3 - CHASSIS & TURNTABLE
3121623 – JLG Lift – 3-71
GENERAL NOTES
Technical data
1) These values are intended as an approximate guide.
Themax.marking on the dipstick is the deter-mining factor.
2) Depending on model (see maintenance charts).
3) Exceeding these limits causes engine breakdown.
Tightening torques
Type 1B40
Design Air-cooled four-stroke diesel engine
Combustion system Direct injection
Number of cylinders 1
Bore / stroke mm 88 / 76
Displacement cm3 462
Lubricating oil capacity without oil sump with oil
sump l, approx.
l, approx. 1.5 1)
3.2 1)
Difference between “max” and “min” levels without
oil sump with oil sump l, approx.
l, approx. 0.8 1)
2.2 1)
Lubricating oil consumption (after running in) max. 1% of fuel consumption
at full load
Lubricating oil pressure (oil temperature 100 °C) approx. 2.5 bars at 3000 r.p.m.
Direction of rotation, power take-off end anti-clockwise
Valve clearance 10 - 30 °C
Inlet and exhaust valve mm 0.10
or automatically 2)
Max. tilt angle in operation, in direction Flywheel 25° down 3) all other directions
35°3)
Weight (incl. fuel tank, air-cleaner, exhaust
silencer, recoil starter and electric starter) kg,
approx.
55
Battery capacity Amp/h max. 12 V / 60 Amp/h
Item Nm
Oil drain plug 50