JLG X20JP - X600AJ Service Manual User Manual
Page 155
Advertising
SECTION 4 - BOOM & PLATFORM
4-2
– JLG Lift –
3121623
4. Remove hardware securing the powertrack to the aft
end of the fly boom section.
5. Using a suitable lifting device, remove fly boom from
boom section.
6. Remove hydraulic lines and electrical cables from
powertrack.
7. Remove hardware securing powertrack to the base
boom section. Remove powertrack.
Figure 4-1. Position pins X17JP - X500AJ
Figure 4-2. Position pins X20JP - X600AJ
Advertising
This manual is related to the following products: