JLG X20JP - X600AJ Service Manual User Manual
Page 42
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-18
– JLG Lift –
3121623
CONNECTION OF THE HYDRAULIC SYSTEM
1. Clean the surface to be connected on the hydraulic
motor.
2. Connect the hoses to the hydraulic motor ports (for
hoses sizes and dimensions refer to the installation
drawing).
Motor open loop hydraulic circuit
a. Service ports: P1-P2
b. Drain port: T1 or T2
c. 2 speed control port: Ps
Advertising
This manual is related to the following products: