Module flashing code – JLG X20JP - X600AJ Service Manual User Manual
Page 234
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-18
– JLG Lift –
3121623
MODULE FLASHING CODE
ECM2 (MASTER BOARD FRONT MODULE) LED
CODE :
With LED permanently ON
DL1 green LED ON: Power +5V to MASTER BOARD FRONT
MODULE CPU
DL2 yellow LED ON: All the outriggers are lifted from the
ground or machine is aligned (photocells signal)
DL3 yellow LED ON: All the outriggers are touching the
ground or all the outriggers are lifted from the ground
Figure 6-40.
Advertising
This manual is related to the following products: