Lenze E94AYCET - Manual (Page 83)

Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 9.0 EN · 02/2014 · TD17
83
11 Diagnostics
11.1 LED status displays
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11 Diagnostics
For fault diagnostics, the communication module is provided with LEDs on the front. Furthermore,
you can carry out the Diagnostics with the »Engineer« ( 88) .
11.1 LED status displays
The following status displays can be differentiated:
 Module status displays ( 84)
 EtherCAT status displays ( 85)
 Status display at the RJ45 sockets (X246 / X247) ( 87)

Note!
During normal operation ...
• only the LEDs MS ( 84) and BS ( 85) should be lit constantly.
• the green LED at the RJ45 sockets X246/X247 must be lit or blink ( 87) .