12 error messages, 1 short overview of the ethercat error messages, Error messages – Lenze E94AYCET User Manual

Page 90

Advertising
background image

12

Error messages

12.1

Short overview of the EtherCAT error messages

90

Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 9.0 EN · 02/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

12

Error messages

This chapter supplements the error list in the reference manual and the »Engineer« online help for

the Servo Drive 9400 by the error messages of the E94AYCET (EtherCAT) communication module.

12.1

Short overview of the EtherCAT error messages

The following table lists all EtherCAT error messages in numerical order of the error number.

Furthermore the preset error response and – if available – the parameters for setting the error

response are specified.

Tip!
When you click the cross-reference in the first column, you will see a detailed description

(causes and remedies) of this error message.

Reference manual/online help for the Servo Drive 9400
Here you can find general information on diagnostics & fault analysis and on error

messages.

Error number

Designation

Response (Lenze setting)

Adjustable in

hex

dec

0x00c83100

13119744

EtherCAT: Connection to 9400 lost

No response

-

0x00c85114

13127956

EtherCAT: Internal supply voltage too low

Information

-

0x00c85531

13129009

EtherCAT: Memory: No access

Information

-

0x00c85532

13129010

EtherCAT: Memory: Error while reading

Information

-

0x00c85533

13129011

EtherCAT: Memory: Error while writing

Information

-

0x00c86010

13131792

EtherCAT: Restart after watchdog reset

Error

-

0x00c86011

13131793

EtherCAT: Internal error

Error

-

0x00c86100

13132032

EtherCAT: Internal error

Information

-

0x00c86101

13132033

EtherCAT: Internal error

Error

-

0x00c86110

13132048

EtherCAT: Internal mapping error

Warning locked

-

0x00c8641f

13132831

EtherCAT: Parameter set invalid

Error

-

0x00c86420

13132832

EtherCAT: Error: Lenze setting loaded

Error

-

0x00c88131

13140273

EtherCAT: Quit the 'Operational' status

No response

C13880/1

/

C14880/1

0x00c88132

13140274

EtherCAT: Sync loss detected in standard device

Warning locked

-

Advertising