RKI Instruments SDM-E2 - Manual (Page 111)

Logs Button • 106
Logs Button
The Logs Window contains saved data from EAGLE 2 instruments in addition to
records of bump tests and calibrations performed with the PC Controller Program. If
you perform a complete download by right clicking a selected instrument and clicking
Download, the Logs Window will contain alarm trend data, calibration data, event
data, interval trend data, memo data, and bump test data. If you do not perform a
complete download or select Down Load Data Logger in the Configuration Window,
the Logs Window will only have memo files and files for any bump tests or
calibrations completed while the EAGLE 2 was connected to the PC Controller
Program.
The Logs Window is divided into four frames. The upper left frame is the Data Frame
and displays all the data folders. If no data has been saved, then no folders will
appear in the Data Frame.
The upper right frame shows the contents of a data folder that is selected in the Data
Frame. The lower right frame shows the summary information for a data file that is
selected in the upper right frame.
The lower left frame contains three selection boxes for organizing data. When
viewing the data, it can be organized in two ways:
1. Base View Format
If you do not select Serial No, Station ID, or User ID, the Base view box
appears next to the selection boxes. The data can be organized by either data
type or by the year and month of the saved data.
Figure 78: Logs Window in Base View Format, Date