RKI Instruments SDM-E2 - Manual (Page 49)

Connecting Instruments to the PC Controller Program • 44
Figure 29: EAGLE 2s Connected and Downloaded
If an instrument is due for calibration, the docking station number and
instrument serial number will be highlighted in red.
If an instrument is due for calibration within the next 10 days, the docking
station number and instrument serial number will be highlighted in orange.
If an instrument’s parameters could not be downloaded properly, a red triangle
will appear over the EAGLE 2 and SDM-E2 picture.
Icon View vs. Details View
EAGLE 2s that are currently connected or have been previously connected can be
viewed in either Icon View or Details View. Choose Icon or Details View by clicking
the Icon or Details radio button below the control buttons. Icon View allows you to
view connected EAGLE 2s and previously connected EAGLE 2s in an icon
configuration. Connected EAGLE 2s are shown as an EAGLE 2 inserted in an SDM-
E2 icon. Previously connected EAGLE 2s are shown as EAGLE 2 icons. Right
clicking an instrument causes the Instrument Function Menu to appear.