RKI Instruments SDM-E2 - Manual (Page 127)

Logs Button • 122
selected and click the Print control button in the upper left corner of the Logs
window. A dialog box will appear confirming if you want to print. Click OK.
5. To save event data from a date folder, be sure the desired date folder is
selected and click the Save control button in the upper left corner of the Logs
window. A “Save As” dialog box will appear for you to specify the file name and
file location.
Figure 91: Save As Dialog Box
The file type will be “.csv” (comma separated values).
Specify the file name and location and click Save.
6. To copy event data from a date folder to the clipboard, be sure the desired date
folder is selected and click the Save to Clipboard control button. The data will
be saved to the clipboard. It can then be pasted into a document by using the
Paste command in an application.
Interval Trend Data
Average gas concentrations over the user defined interval trend time are logged in
the interval trend data files. The interval trend time is set using either the Data Log
Interval menu item in the Edit Function Screen or in the EAGLE 2 Setup Mode. See
“Edit Function” on page 140 or the EAGLE 2 Operator’s Manual for instructions to set
the interval trend time. Events such as gas alarms or sensor failures are saved in the
interval trend data file when they occur.
An interval trend data file is created and saved in the EAGLE 2 when the instrument
is turned off or when a user ID, station ID, or catalytic combustible channel gas
configuration (using the relative response feature in Display Mode) is changed during