RKI Instruments SDM-E2 - Manual (Page 95)

Calibrating an Instrument with Special Sensors • 90
8. You will then be asked to confirm the gas cylinder concentration and the
instruments that the cylinder will be used for. The serial number and gas
combination of all selected instruments will appear sequentially beneath the
gas cylinder concentrations. The screen below confirms that the standard 4
sensors will be calibrated using GAS 1 and the special sensor will be
calibrated using GAS 2.
The GAS 2 selection box is deselected by default. You
must select the GAS 2 box if you wish to calibrate the special sensor. If you do
not wish to calibrate the special sensor, leave the GAS 2 box deselected.
Figure 67: Gas Order Confirmation Screen