RKI Instruments SDM-E2 User Manual
Page 30
Advertising
![background image](/manuals/571388/30/background.png)
25 • Installing the SDM-E2 Docking Station PC Controller Software
18. The first time a SDM-E2 is turned on after being connected to the computer, a
Found New Hardware window will appear.
NOTE:
The following instructions do not apply to computers running Windows
Vista or Windows 7. The hardware driver will automatically install and
you will be notified that the USB device is ready for use.
Figure 17: Found New Hardware Wizard
19. Select the “Install the software automatically” option and click Next.
Advertising