RKI Instruments SDM-E2 - Manual (Page 166)

161 • Instrument Function Menu
While the pre-defined gases may not be edited, the 1 user-defined gas may be edited
by doing the following:
1. Click on the PID Sensor tab and then click on the High Range tab.
2.00-2.99 100.0 0.1
3.00-3.99 150.0 0.1
4.00-5.99 200.0 0.1
6.00-7.99 300.0 0.2
8.00-9.99 400.0 0.2
10.00 500.0 0.2
Table 5: Low Range PID
Factor
Full
Scale
(ppm)
Increment
Figure 122: PID Sensor Tab, High Range